AMP PowerStep XL

Description

AMP Research is the leading provider of power-retractable running boards, making waves with its original PowerStep™. While providing sufficient assistance for most individuals, AMP Research offers this beefier, lower-hanging iteration, the PowerStep™ XL!

This heavy-duty PowerStep™ retains the same general design as AMP’s conventional retractable running boards with a few improvements geared toward oversized and heavily lifted applications. The upgrades include a rugged housing that the boards retract into, providing a more robust appearance for lifted rigs, as well as boards that drop an additional 4 inches lower than other PowerStep™ models, making it easier to get in and out of your ride!

Like all other PowerStep™ variants, the XL is manufactured entirely from durable die-cast aluminum, ensuring maximum strength and minimum weight. All aluminum components are anodized and coated with a military-grade PTFE (Teflon), preventing surface corrosion. Due to the 6″ wide PowerStep™ XL’s rugged alloy construction, these steps can withstand a whopping 600 pounds, far heavier than traditional side steps!

For added convenience, these steps feature bright LED chips integrated into the central rail, casting a vibrant glow onto the step surface and surrounding area to ensure sure-footed entry, no matter the time of day. For the ultimate blend of styling and convenience for your lifted pickup, check out the AMP Research PowerStep™ XL.

Features

  • Lowest deployed power-retractable running boards
  • XL boards extend 4-inches lower than original PowerStep
  • Premium, single-motor design automatically deploys and retracts boards
  • Corrosion-resistant cast aluminum construction
  • Anodized, then finished with a military-grade PTFE coating
  • 6-inch wide, cab-length step area
  • Textured, slip-resistant step surface
  • Integrated LED lighting illuminated steps for safe entry
  • Optional Override Switch is available for manual control
  • Includes vehicle-specific installation guide, mount kit, and hardware
  • Mounts to vehicle’s rocker panel
  • Connects to OBDII port using patented Plug-N-Play module
  • Professional installation is recommended
  • Find your AMP Research replacement parts here
  • 5-year limited warranty
Cleaning your PowerStep

In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise, or binding.

Prepare for cleaning

Manually set the running boards to deploy: The running boards can be manually set in the deployed position by opening the door, and then place your foot on the step. Leave firm pressure with your foot on the step while you close the door. This will leave your steps in the deployed position.

How to maintain your steps:

Using a pressure washer to clean the front and rear linkages which are all 4 hinge points for your PowerSteps. Avoid spraying the motors directly.

After washing, apply silicone spray (dry Film lubricant) only, to all 4 linkage arms and all pivot pins, some of these pins will be located up high on the linkage arm as well. Then cycle the door to work the lubrication in to the hinge points.

Do not apply silicone, wax, or protectants like Armor All® to the running board. Do not lubricate with any greases, oils, WD-40, or penetrants.

This cleaning should be done periodically, or when debris such as mud, dirt or salt becomes trapped in the running board mechanism.

Showing 1–9 of 25 results